No content yet—stay tuned!

Huh, there’s no content yet—why not take a quick look around other sections first?

304 Stainless Steel 45-Degree Elbow

A 90-degree elbow made of 304 stainless steel is a standard pipe fitting whose primary function is to enable precise 90-degree turns in pipeline systems.
Inquiry Inquiry

Carbon Steel 90-Degree Elbow

A 90-degree elbow made of 304 stainless steel is a standard pipe fitting whose primary function is to enable precise 90-degree turns in pipeline systems.
Inquiry Inquiry

Large-diameter carbon steel and stainless steel oval flat-bottom spherical head

Stainless steel pipe end caps, also known as pipe caps, as their name suggests, serve to seal the ends of pipes.
Inquiry Inquiry

Stainless Steel Butt-Welded Reducing Pipe

A concentric reducer is a type of pipe reducer that aligns pipe components on the same axis and has a conical shape.
Inquiry Inquiry

Carbon Steel Seamless 90-Degree Elbow

Commonly used in piping systems for petroleum, chemical, power, marine, and mechanical equipment applications, this fitting is suitable for connections requiring a 45-degree directional change in boiler pipelines, hydraulic systems, process pipelines, and other similar applications. It is primarily designed for conveying non-strongly corrosive media such as steam, water, oil, and gas.
Inquiry Inquiry

Stainless steel welded 180° Elbow

A welded 180° elbow, also known as a "return bend," functions to change the direction of fluid flow in a pipeline by 180 degrees.
Inquiry Inquiry

Lined flange cover (code BL (S))

The full name is “Lined Flange Cover,” designated as BL(S). It is a special type of blind flange (flange cover) that features an additional corrosion-resistant lining on the sealing surface side, used to seal pipelines while providing protection against media corrosion.
Inquiry Inquiry

8-character blind flange (code name BLF)

The full name is “8-shaped blind flange,” with the code BLF. It’s a special type of flange cover that resembles the shape of the number “8.” It consists of two parts: a “blind flange (sealing end)” and a “ring flange (flow-through end).”
Inquiry Inquiry

Welding Neck Flange (Code SO)

The full name is “Welding Neck Flat-Face Flange,” designated as SO. Its defining feature is its short-neck structure; after the pipe is inserted into the flange’s neck opening, it is connected by a flat weld (with the weld located on the outer side of the flange neck).
Inquiry Inquiry

Welding Neck Flange (Code WN)

The “welding-neck flange,” designated as WN, is one of the commonly used types of flanges. It is characterized by a short, tapered neck that is welded to the pipe using a butt-weld connection.
Inquiry Inquiry

Raised Face (RF) Flange

The sealing type “Raised Face to Raised Face (RF-RF)” is one of the commonly used mating configurations for flange sealing surfaces, and it applies to plate-type flat-welded or butt-welded flanges.
Inquiry Inquiry

Carbon steel four-way fitting

A four-way tee is a branch fitting in a piping system with four interconnected ports oriented in mutually perpendicular directions. It is primarily used for dividing flow, combining flows, or changing the direction of fluid flow.
Inquiry Inquiry

Concentric Eccentric Reducer

A reducer, also known as a reducing pipe, is a pipe fitting used to connect two pipes of different diameters.
Inquiry Inquiry

Carbon steel elbow

Carbon steel elbows are fittings used in piping systems to change the direction of pipelines; their main material is typically carbon steel such as Q235 and 20#.
Inquiry Inquiry

Carbon Steel Tee

A carbon steel tee is a branch fitting used in piping systems, primarily for diverting or combining fluid flows.
Inquiry Inquiry

Stainless steel reducer

A stainless steel reducer, also known as a reducing pipe, is a pipe fitting used in piping systems to connect two pipes of different diameters.
Inquiry Inquiry

DN25-DN1200 Carbon Steel Pipe caps

A head is a component used at the ends of vessels, pipelines, or equipment to provide sealing and pressure-bearing functions.
Inquiry Inquiry

Head cover

A head is a component used at the ends of vessels, pipelines, or equipment to provide sealing and pressure-bearing functions.
Inquiry Inquiry
< 12 >

Request a quote now

We will contact you within one business day. Please make sure to check your phone and email.

Submit requirements